HAGER MOTION SENSOR FLUSH MOUNTED EE805
LIGHTING OUTPUT CONTROL: On power-on, the detector switches its circuit on for 30 seconds. The lighting output is switched on when the brightness level set by potentiometer d is considered too low and movement is detected. After detection, the light remains on for the time set by potentiometer c The delay is reset after each movement detection occurrence. SETTING: It is possible to set potentiometers c and d (the operating time and the brightness level). In order to facilitate set-up by the user, detectors are pre-set with a default setting suitable for standard installation: traffic area, corridor… Operating time: from 5 seconds to 15 minutes . Potentiometer c is pre-set to a default value of approximately 3 min. Brightness level: from 5 to 1000 Lux. Potentiometer c is pre-set to a default value of approximately 200Lux.
Infrared movement detector for semi flushed mounting cieling Operation time 5 seconds to 15 minutes Brightness level 5 to 1000 Lux 6m range. 360° movement detectors with built-in light-sensitive switch function. They are particularly intended for use in interior traffic areas such as corridors, entrance halls. These devices detect infrared radiation associated with heat emitted by moving bodies. Detection is by a pyro-electric sensor located under the lens
UOM | PCS |
---|---|
Specifications |
|