EAST AFRICAN ARMOURED CABLE 120mm2 4-CORE
These cables are most suitable for direct burial or for installation on trays or ducts,
Where there is a risk of mechanical damage, armoured cables should be used.
For laying in ground along route with large difference of level able to bear external mechanical forces.
Conductor: Solid or stranded copper
Insulation: Polyvinyl chloride (PVC)
Filler: Polypropylene filament with lapped binding tape
Binder: Binding tape
Inner sheath: Polyvinyl chloride (PVC)
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA)
Sheath: Polyvinyl chloride (PVC)
1). Rated power-frequency voltage Uo/U: 0.6/1KV.
2). Max. permissible continuous operating temperature of conductor: 70℃
3). Max. short-circuit temperature of the conductor shall not exceed: (5S maximum duration) 160℃
4). The ambient temperature under installation should not below 0℃
5). The bending radius of a cable should not be less than 15 times of the cable diameter.
| Country of Manufacture | Kenya |
|---|---|
| UOM | ROLL |
| Specifications | Volatge : 600/1000V Max. permissible continuous operating temperature of conductor: 70℃ Conductor: Solid or stranded copper Insulation: Polyvinyl chloride (PVC) Filler: Polypropylene filament with lapped binding tape Binder: Binding tape Inner sheath: Polyvinyl chloride (PVC) Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA) Sheath: Polyvinyl chloride (PVC) |
| Application Areas | Electrical installation. |